Barracuda Networks SP4 Instrukcja Użytkownika Strona 93

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 118
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 92
TECHNICAL SPEC
ENG
93
Axel Technology srl
www.axeltechnology.com
AUX IN (1 AND 2)
Connector Type
floating BNC, EMI suppressed
Pass-through Level
-40dB
÷
+ 20 dB trimmer adj. max 24 Vpp input
Frequency response
30 Hz
÷
80 KHz +/- 0.1 dB
Distortion
< 0.03 %
Input Impedance
> 10 Kohm
Purpose
MPX and SCA (RDS) Inputs
Injection of a MPX Signal Routed
directly to Mpx Out (Split Option)
SYNC-OUT
Connector Type
floating BNC, EMI suppressed
Purpose
TTL-level (5Vpp) 19 kHz Pilot Ref. Out for synchronizing external
RDS coders.
Sync Out phase error
±
2 degrees (maximum)
MPX, RDS & MPX+RDS OUTPUTS
Output Connectors
Two BNC, floating over chassis ground, EMI suppressed
Load Impedance
600 Ohm or greater
Source impedance
10 Ohm
D/A Conversion
Burr Brown PCM1704
Maximum Load Capacitance
5nF
External MPX summation
With external MPX injected into Aux 1 (Aux 2 if selected by jumper)
Composite output level
- 9.0dBm to +15.0 dBm (0.1 dBm step)
ANALOG AUDIO INPUT
Connectors
Two EMI-suppressed XLR female.
Input Configuration
Stereo.
Input impedance
600 / 10K ohms electronically balanced, jumper selectable
Nominal Input Level (sensistivity)
Software adjustable from –-9dBm to +15.0 dBm
Level Range
21.0dBu
÷
+ 24.0dBu
Max Input Level
+ 24dBu
A/D Conversion
Crystal Semiconductor CS4224, 24 bit /48 Khz delta sigma converter.
Input CMRR
>60dB (20Hz-20kHz)
Headroom
10 dB (default) / 20 dB (Full Range Mode)
DIGITAL AUDIO INPUT
Connector Type
XLR female & optical tos/link. XLR transformer balanced & floating.
110 Ohm impedance
Input Configuration
Stereo.
Formats
AES3/EBU & Spdif
Input Rates
32/44.1/48/64/88.2/96KHz with automatic selection and jitter
correction
Nominal Level adj (sensitivity)
From 0.0dBFs to 24dBFs (0.1dBu Step)
Level Range
0.0 dBFs
÷
-36dBFs
Dynamic Range (Rate Converter)
124dB (32Khz) 126dB (44.1Khz) 126dB (48Khz) - 122dB (96Khz)
Resolution
16 / 24 bit
AUDIO LIMITER
Purposes
- Overcoming errors and distortions which usually appear as
undesired peaks (as high as 100 or more KHz of deviation, assuming
75 KHz mean value) on input audio program.
- Control of sudden level changes on input program (up to 3 dB)
- Compensation for slow input audio level changes (fading)
- Increasing of output MPX density
- Application of a smooth (logarithmic) clipping process to incoming
audio to reduce out-of-band noise and therefore improve Rds and Aux
signals quality
Limiter stage sources
Audio limiter applies to both analog and digital input sources.
Przeglądanie stron 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 117 118

Komentarze do niniejszej Instrukcji

Brak uwag