Barracuda Networks SP4 Instrukcja Użytkownika Pobierz pdf (Strona 42)

MANAGING BARRACUDA in GROUPS

ENG

Axel Technology srl

www.axeltechnology.com

For example, the picture above shows a Satellite channel, which is typically uni-directional, two serial RS232

connections, one monodirectional (because connecting a group of equipment) and one bi-directional (linking just one

unit). Up to 3 Users can be managed, each one accessing its own system tree, i.e. its own portion of system.

That means, it is possible to give to each user different rights in accessing the targets and their configuration.

Group Number and Device Number correspond

respectively to UECP Site Address and Encoder

Address codes, and can be assigned using Smart

Target Address Manager

21.1 FIRST STEP: COMPOSING THE SYSTEM ‘TREE’ INTO THE BSN (EDIT MODE).

As first step, You need to ‘edit’ (draw) the system tree like on a ‘blackboard’, starting from the central Control Pc, adding

connection channels and, for each ‘branch’, the associated target(s) or groups of units. Local Host Pc is the Pc running

the Smart Coder Remoter software (i.e. the Pc you are using!). At this time, each single element composing the system

will be not configured. We just place ‘blocks’ onto a virtual ‘blackboard’, to have a proper representation of the actual

system. Later, from the Work Mode, each unit will be assigned with ‘real’ operation parameters, such as Baud Rate, Com

Ports, Address, etc.

You may edit / compose 3 different system trees, one for each USER listed in the Smart Coder Remoter panel (USER 1,

USER 2, USER 3)

Select the User access (for

example. User 1) and then press the

‘Open Panel’

button: the User

navigation Panel will be

automatically displayed.

LOCK function:

To prevent undesiderable access to

system configuration pages, enter a generic password

(which can be changed at user’s discretion) in the

blank field and click Lock button.

To unlock, enter the SAME password and click ‘unlock’

Click Edit Mode button: Edit Mode Navigator Panel will

open ( and the ‘Edit Mode’ identificator appears at the

upper right corner).

Move the mouse pointer onto the

LocalHost icon and then click right: a

pop-up menu will appear.

First, You

have to add a Com Channel, i.e. a serial

link connecting the Control Pc to remote

target(s). That Com Channel will be

edited later.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 117 118

Komentarze do niniejszej Instrukcji

Brak uwag

Barracuda Networks SP4 Instrukcja Użytkownika Strona 42

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Barracuda Networks SP4